Edge Pro Commercial Prog. or Non Programmable Thermostat

Carrier's Edge Pro commercial thermostat maintains room temperature by controlling the operation of an HVAC system. Separate heating and cooling set points and auto-changeover capability allow occupied and unoccupied programming for energy savings.

Features:

• 7-day, 5/2-day, or 1-day programmable or non-programmable
• Sleek design with simplified two-wire installation
• 2-stage heat/2-stage cool with auxiliary heat (air conditioning, heat pump, and water source heat pump units)
• Humidity control capability (with 33CS2PPRH-03 thermostat only) integrates with Humidi-MiZer® dehumidification system
• Hybrid Heat® dual fuel system compatible (33CS2PP2S-03)
• Proportional integral control of heating and cooling stages
• Compressor lockout in emergency heat mode for heat pumps
• Auxiliary heat lockout sensing for heat pumps (requires outdoor air sensor)
• Remote sensing and averaging with occupancy override
• Keypad lockout security with passcode protection
• Heating and cooling set points with up to 6 hours of occupancy override
• 4 or 2 periods per day selectable
• No batteries are required, user-configured settings are stored for an unlimited period of time
• UV light and filter service reminder
• Expanded backlit display features mode and equipment status, occupancy, time of day, and outdoor air temperature
• Hospitality mode — display user set point in place of actual temperature
• Daylight savings adjustment
• Random start
• Smart recovery
• Dry contact enables economizer control