Sort by:
ACH055 Dryout Thermostat/Low Ambient Cutoff Switch (55°F)
$14.76
The low cost, single setpoint ACH055 thermostat is intended for use as a temporary device to provide heating or cooling to allow drywall to dry during construction. The ACH055 can...
ACH065 Dryout Thermostat (65°F)
$12.37
The SC065 series thermostat is a low cost, single set point thermostat intended for use as a temporary device to provide heating or cooling to allow drywall to dry during...
ACH075 Dryout Thermostat (75°F)
$15.85
The ACH075 series thermostat is a low cost, single set point thermostat intended for use as a temporary device to provide heating or cooling to allow drywall to dry during...
ACS-11 Relay Socket
11 Pin
$14.72
Features Relay socket 10 amps up to 480 VAC 11 pin octal plug-in base Locating key ensures proper orientation Order ACS-8 for 8 pin base For use with ICM408, ICM410-427,...
ACS-8 Relay Socket, 8 Pin
$13.12
Features Relay socket 10 amps up to 480 VAC 8 pin octal plug-in base Locating key ensures proper orientation Order ACS-11 for 11 pin base For use with ICM408, ICM410-427,...
ECM to PSC Motor Controller
$77.12
The ICM715 provides a cost effective control solution when converting from the use of an expensive electronically commutated motor (ECM) to using an economical permanent split capacitor motor (PSC). Provides...
FS1500L Frost Sentry Garage Thermostat (Horizontal)
$65.45
When it comes to freezing cold temperatures, you can relax knowing ICM's Frost Sentry is on guard. This low-cost, single-set point thermostat is perfect for areas requiring temporary or permanent...
ICM102 Delay on Make Timer (.03-10 Minute Adjustable Delay)
$22.64
Mode of Operation - When power is applied to the input, the time delay begins. After the time delay is complete, the load energizes. Delay on Make Timers are ideal...
ICM102F Delay on Make Timer, 6" Wire Leads
(.03-10 Minute Adj. Delay)
$21.77
Mode of Operation - When power is applied to the input, the time delay begins. After the time delay is complete, the load energizes. Delay on Make Timers are ideal...
ICM103 Delay on Make Timer (1-1,023 Second Switch-Settable Delay)
$22.15
Delay on Make Timers are ideal for compressor staging and stagger starting multiple motors and other equipment. Helps to reduce power surges. Mode of Operation - When power is applied...
ICM104 Delay on Make Timer (10-1,000 Second Knob Adjust. Delay)
$41.12
Delay on Make Timers are ideal for compressor staging and stagger starting multiple motors and other equipment. Helps to reduce power surges. Features Highly precise digital circuitry High power, SPDT...