Carry Your Pup With You Wherever You Go- Shop Now

Your shopping cart is empty

Register

The Complete List of the Must Have HVAC Tools
HVAC Technicians must have a handy supply of tools at their clearance consistently. We have a showcase of tools that you will want to purchase and have nearby for service calls, installs, and routine upkeep of heating and air units.
Hand Tools
In this section, we deliver you a selection of the best basic hand tools. These comprise a selection of tools that are useful across many trades. We also mention a step ladder in this section because you will often need to step up to reach outlets or other overhead items.
Here are the tools we'll cover in this section:
  • Hammer
  • Screwdrivers
  • Pliers
  • Tape Measure
  • Wire Strippers
  • Pipe Wrench
  • Step Ladder
Hammer
One of the most understandable and ordinary tools in the classic tool belt set is the hammer. HVAC technicians use hammers to do an assortment of tasks. A lightweight hammer is frequently the best choice because it is just one of the many tools on the HVAC technician’s tool belt. The Stanley 51-112 7 grain fiberglass hammer is our reference. The classic Stanley buttery coloring makes the hammer extremely visible on the job site. Its fiberglass structure makes it tough and strong. It also has an easy grip.
Screwdrivers
Every HVAC technician identifies that no toolkit would be complete without a set of excellent screwdrivers. HVAC technicians face many tasks that necessitate screwing and unscrewing screws of all sizes. Whether it is working on the unit, vents, or thermostat, screwdrivers are important to getting the job done.
In our experience, Craftsman screwdrivers are hard-wearing and dependable. The blade tips are of exactness size and are designed with maximum rotating power in mind. The Craftsman tools are of the highest excellence struggle slipping. Our favorite bundle is the Craftsman 9-47136 Slotted Phillips Screwdriver Set, 8 Piece. It contains four Phillips head screwdrivers and four slotted screwdrivers and a lifetime guarantee.
Pliers
HVAC technicians are often wounding wire. Wire pliers are regularly used in cutting weighty wire that runs to or from the breaker box. The needle nose pliers are used in clutching wire when working on a thermostat.
The needle nose pliers are narrow sufficient to reach inside the wall to reach the wire. Pliers of numerous sizes come in handy for numerous tasks on the job site. We recommend the Workpro 7-piece Pliers Set.
Tape Measure
A twenty-five-foot measuring tape is another staple in the HVAC technician’s toolkit. From measuring ductwork to measuring space for furnaces, vents, or air conditioner units, HVAC technicians must know how to read a tape measure accurately.
Tape measures are beaten out on a moment’s notice and used frequently. Not just any tape measure will do. The Komelon measuring tape is our recommendation because it self-locks retracts, and is tough.
Wire Strippers
The wire stripping tool is a common flier for the HVAC technician. It doesn’t stay in the tool belt holster long before it is thrashed out and put to use again. HVAC technicians are often stripping wire and rewiring it with wire nuts.
The stripping tool makes this process much faster and is easier than using a knife to peel the wire’s covering back. Our recommended wire stripper, from Garry Tools, is tough and lightweight.
Pipe Wrench
HVAC technicians use plumbing tools such as the pipe wrench. Pipes of changing sizes necessitate you to use different size pipe wrenches. There are pipes devoted to furnaces. If you are connecting or mending a furnace, you will need to use a pipe wrench to eliminate or assign the pipes. The Trades 14-Inch Heavy Duty Pipe Wrench is our suggested set for use by HVAC technicians.
Step Ladder
Don’t overlook the step ladder when you are stuffing your HVAC work truck. It is an imperative tool that you might not think you would need very frequently, but if you are working in the field servicing units and housework vents, you will likely need a step ladder several times during your workweek. The Louisville Ladder L-3016-04 Fiberglass Stepladder can give you an extra four feet in height if you need it.
Specialty Tools
In the course of a workweek, HVAC technicians use a diversity of specialty tools. Sometimes HVAC technicians will need to use all of these all on the same day. It just is contingent on the scope of the job at hand. We have amassed a list of tools that need to be crammed into the toolbox for everyday use.
These are some of the other tools that are important for the HVAC tech:
  • Multimeter
  • Thermometer
  • Cordless Drill
  • Sawzall (Reciprocating Saw)
  • Manifold Gauge
  • Extension Cord
  • Tubing Cutter
Multimeter
Multimeters are the HVAC technicians’ go-to tool to keep from getting electrocuted. In spirit, the multimeter checks for electrical current and determines if the voltage is present. It is used to notice current at switches, wires, or outlets. This is one of the most significant subject tools that an HVAC technician uses. We recommend the Fieldpiece HS36.
Thermometer
HVAC technicians use thermometers frequently to regulate the temperature change. Temperature determines if a refrigerant needs to be added or if a piece of apparatus is working appropriately. The thermometer used by HVAC technicians is a particular tool and is much dissimilar to the thermometer that checks a person for temperature. The HVAC technician must have a perfect thermometer because their job depends on it. We recommend the Fieldpiece ST4 Dual Temperature Meter for accurate temperature readings.
Cordless Drill
HVAC technicians use cordless drills consistently. They need one that will be dependable and durable because it will be approved into lofts and into crawl spaces where the real work is done. You may be bored with a new hole to run wires in the closet or the loft. Cordless drills can go anywhere and are not limited to a particular coldness from an electrical outlet. Our recommendation is the Makita cordless drill.
Sawzall
HVAC technicians are always cutting through muddled materials or cutting overhead. The Sawzall is used to cut through old condensers, drywall, sheet metal, pipes, or wood. The Sawzall is ideal for cutting through dissimilar types of materials without changing power tools. Our recommendation for this tool is made by Makita.
Manifold Gauge
The manifold gauge set is one of the most used subject tools in the HVAC tool bag. This set is used to control if escapes are present. They are also used when charging an air conditioner unit. The instrument is also useful during the removal of refrigerants. The analog devices have been around for periods and are effortlessly read and understood by expert HVAC technicians. The digital gauges are newer and becoming more popular. The Fieldpiece digital gauge is our reference.
Extension Cords
Extension cords are tools that are the unsung idols for the HVAC technician. HVAC techs are always demanding to power up away from the electrical passage or producer. The weighty duty allowance cord extends the electricity into the faraway recesses of the attic or sheds light on the crawlspace area underneath the house.
Ordinary household wiring doesn’t stand up to the power load that HVAC technicians use for operating power tools. The industrial-grade allowance cord is stronger than a household extension cord, and we suggest the US Wire 74050 extension cord for use on the HVAC job site.
Tubing Cutter
Tubing cutters are used to cut pipes. During installation or reparation of HVAC apparatus, these cutters make the job well-organized. These are standard cutters that cut an assortment of materials. The DIAOSnx Mini Hand Miniature Tubing Cutter Tool is our suggestion for use in tight spaces.

Leave a comment

 

img

Added to cart successfully!